Digimerge DHU104 用户手册
32
System Menu
SYSTEM MANAGEMENT
Factory Defaults
The System can be returned to the Factory
default settings:
default settings:
• Select the ‘Factory Defaults’ option by
selecting the PRESS button.
• Login with your user ID and password.
• Choose OK to reset the unit, or
CANCEL to exit without resetting.
NOTE: If the System is reset to Factory
Defaults, all settings will be lost (except the
Date and Time).
Defaults, all settings will be lost (except the
Date and Time).
System Data
The System settings can be saved to a
USB flash drive:
USB flash drive:
• Insert the USB flash drive into the
System and select the Save option to
save settings:
save settings:
• A Success message indicates that the
backup was completed.
• If the device is not detected, a message
will indicate that No storage device was
found.
found.
• Insert the USB flash drive into the
System and select the Load option to
restore settings.
restore settings.
• This is recommended after initial setup
and installation is complete.
CONTROL DEVICE
Used with an external control device (not
included with the system):
included with the system):
• System ID - Select system ID. (1~254)
• Protocol - Select protocol (from the
Device user Manual).
• Baud rate - Setup baud rate (from the
Device user Manual).