Digidesign Control 24 用户手册
Control|24 Guide
92
To toggle all MIDI tracks in or out of Record-Ready
mode, do one of the following:
mode, do one of the following:
■
While pressing APPLY TO ALL CHANNELS,
press REC ARM on any active MIDI track.
■
While pressing OPT(ALT)/ALL, press MASTER
REC.
■
While pressing OPT(ALT)/ALL, press REC
ARM on any active MIDI track.
To toggle the currently selected tracks in or out of
Record-Ready mode, do one of the following:
Record-Ready mode, do one of the following:
■
While pressing the APPLY TO ALL SELECTED
CHANNELS switch, press any selected channel’s
REC ARM switch.
REC ARM switch.
■
While pressing the
OPT(ALT)/ALL+SHIFT/ADD switch, press any se-
lected channel’s REC ARM switch.
lected channel’s REC ARM switch.
■
Press SHIFT/ADD+MASTER REC.
Recording
To initiate recording:
1
Make sure the appropriate tracks are record-
enabled and routed correctly, and that you have
armed Pro Tools and selected a record mode as
described in the previous sections.
armed Pro Tools and selected a record mode as
described in the previous sections.
2
To begin recording, press PLAY in the Con-
trol|24 main TRANSPORT section. If in Wait for
Note mode, recording will not begin until
Pro Tools receives MIDI input.
Note mode, recording will not begin until
Pro Tools receives MIDI input.
RECORD and PLAY will both stay lit for the du-
ration of the recording pass. You can stop re-
cording at any time by pressing STOP (or by
pressing the Space bar on your computer key-
board).
ration of the recording pass. You can stop re-
cording at any time by pressing STOP (or by
pressing the Space bar on your computer key-
board).
To cancel out of a recording and discard the
current take:
current take:
■
Press SHIFT/ADD+STOP.
Record Safe Mode
Pro Tools provides a Record Safe mode to keep a
track in a session from being record-enabled.
track in a session from being record-enabled.
This is a way to avoid inadvertently recording
over a track, particularly in large sessions where
some tracks may be outside of the currently vis-
ible bank.
over a track, particularly in large sessions where
some tracks may be outside of the currently vis-
ible bank.
Record Safe mode also expands the uses for the
MASTER REC switch. If you protect selected
tracks with Record Safe mode, then MASTER
RECORD becomes a one-touch way to record
enable the remaining tracks.
MASTER REC switch. If you protect selected
tracks with Record Safe mode, then MASTER
RECORD becomes a one-touch way to record
enable the remaining tracks.
To enable record safe status on a channel strip:
1
Press REC SAFE.
2
Do one of the following:
• Press REC ARM on the channel you would
like to put into Record Safe mode.
– or –
• While pressing
(CTL), press the channel
REC ARM switch.
The REC SAFE LED will light when any tracks are
placed in Record Safe mode.
placed in Record Safe mode.
For instructions on configuring the foot-
switch UTILITY options for play/stop,
record, or remote talkback, refer to
Appendix B, “Utility Functions.”
switch UTILITY options for play/stop,
record, or remote talkback, refer to
Appendix B, “Utility Functions.”