Behringer Europower PMP1000 业主指南

EUROPOWER PMP6000/PMP4000/PMP1000 User Manual

Fig. 5.2: Bridged mono operation

PMP1000

PMP4000

PMP6000 

Rear panel

EUROPOWER EP2000

EUROLIVE 

VP1520

EUROLIVE B1800X 

Subwoofer

2 x BEHRINGER F1220D 

(active)

This illustration shows the power mixer with a sub-woofer connected to 

OUTPUT B. For a bridged mono operation to OUTPUT B, the AMP MODE selector 

switch  

(27)

  must be set to its lower position “BRIDGE”. A separate stereo power 

amp (BEHRINGER EUROPOWER EP2000) connected to the preamp main outputs 

delivers the stereo main signal. Two active monitor speakers for on-stage 

operation are connected to the preamp monitor output.

Fig. 5.3: Dual mono operation

PMP1000/PMP4000/PMP6000 

Rear panel (excerpt)

2 x BEHRINGER EUROLIVE VP1520 

(passive)

2 x BEHRINGER 

EUROLIVE VP1220F 

(passive)

For a dual mono operation, the AMP MODE switch  

(27)

  must be set to its center 

position (MON1/MONO for PMP4000/PMP6000  or MON for PMP1000)! The two 

loudspeaker outputs provide the main and the monitor signals, separately from 

each another. Each of these signals is then sent to two speakers wired in parallel.