Broil-Mate 115997 NG 用户手册

1.  On models supplied with an extension hose, the hose 

assembly is specifically designed for your model.  No 
modifications or additions should be attempted.  Hose 
and hose couplings comply with CGA Standard CAN 
1.83. 

2.  On models equipped with the "quick disconnect" 

coupling, close "shut off valve" before disconnecting 
coupling. 

3.  "Quick disconnect" coupling must be kept clean and 

free of dirt and debris. 

4.  Protect the hose from dripping grease and do not allow 

the hose to touch any hot surface, including the base 
casting of the barbecue. 

5.  Inspect the hose at least once per year.  If the hose is 

cracked, cut, abraded or damaged, the appliance must 
not be used. 

6.  For replacement of hose assembly, contact your dealer 

or approved service centre. 

4 

A.  GAS SUPPLY PIPING 
B.  QUICK DISCONNECT COUPLING 
C. ADAPTER FITTING 
D.  EXTENSION HOSE ASSEMBLY 
E.  LEAK TEST HERE 

•  KEEP VENTURI TUBES CLEAN. 
•  Blockages caused by spiders insects and nests 

Although the barbecue might still light, the backed up gas 
might also ignite and cause a fire around the venturi tubes 
at the control panel or side burner. 

 

•  If a flashback fire occurs, turn off gas at the 

Inspect and clean the venturi tubes (main burner, side 
burner, rear burner) if any of the following symptoms 
occur: 
1.  You smell gas. 
2.  Your barbecue does not reach temperature. 
3.  Your barbecue heats unevenly. 
4.  The burners make popping noises. 

1.  Turn off gas at the source.  i.e. the gas cylinder or 

supply line for natural gas. 

2.  When barbecue is cool, remove burner fasteners from 

bottom, lift the burner from the barbecue housing. 

3.  Clean the venturi tubes with a pipe cleaner or venturi 

cleaning tool (Accessory #18270). 

4.  Lower the burner into position in the barbecue 

housing, making sure that the venturi tubes are 
correctly aligned and fitted on the orifices. 

5.  Secure burner with burner fasteners.