Broil-Mate 115997 NG 用户手册

All factory-made connections have been thoroughly 
tested for gas leaks.  However, shipping and handling 
may have loosened a gas fitting. 
AS A SAFETY PRECAUTION:  
•  TEST ALL FITTINGS FOR LEAKS BEFORE USING 

YOUR GAS BARBECUE. 

•  TEST FOR LEAKS EVERY TIME YOU 

5 

•  DO NOT SMOKE! 
•  NEVER TEST FOR LEAKS WITH A LIGHTED 

•  TEST FOR LEAKS OUTDOORS. 
 
TO TEST FOR LEAKS: 

 

A.  GAS SUPPLY PIPING 

 

B.  QUICK DISCONNECT COUPLING 

 C. 

ADAPTER 

FITTING 

 

D.  EXTENSION HOSE ASSEMBLY 

 

E.  LEAK TEST HERE 

1.  Check that appliance is turned off at the controls for 

each burner.  Extinguish any open flame or cigarettes 
in the area. 

2.  Prepare a soap solution of one part water, one part 

liquid detergent. 

3.  Open gas shut off valve. 
4.  Brush the soap solution on each connection. 

If your barbecue is equipped with a side burner or rear 

burner: 

a.  Place finger tip over the opening in the orifice at the 

end of hose. 

b. Turn "SIDE"/"REAR" control to "HIGH". 
c.  Brush soap solution on each connection between 

orifice and control valve. 

d. Turn "SIDE"/"REAR" control to "OFF". 

                        
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

5.  A leak is identified by a flow of bubbles from the area 
of the leak. 
6.  Any leak detected must be sealed before the 

appliance can be used. 

7.  If the leak cannot be sealed, shut off the gas  supply 

and contact the dealer or the gas company for 
assistance.  DO NOT attempt to operate the 
appliance.