Bil-Jax Bicycle Accessories et 4000 用户手册
EQUIPMENT LOADING
6
Raise the Deck (trailer must be hitched to vehicle)
1. Turn power switch to ON position and hold
toggle switch in up position. Stop raising deck
when deck latch is on latch bar.
when deck latch is on latch bar.
2. Verify that deck latch is on latch bar. Turn
power switch to OFF position.
Make sure people are away from the trailer
before raising the deck. Keep hands and feet
away from deck and rails. Hands and feet can
get crushed between the deck and frame.
before raising the deck. Keep hands and feet
away from deck and rails. Hands and feet can
get crushed between the deck and frame.
If not clamped, the deck may fall during travel.
Always clamp the deck before towing. Failure to
clamp the deck may result in injury, death, or
equipment damage.
Always clamp the deck before towing. Failure to
clamp the deck may result in injury, death, or
equipment damage.
Towing and Backing the Trailer
1. After backing and before towing trailer on
highway, always check the position of the
backup lever. Make sure the backup lever is
in the TOWING position (up).
backup lever. Make sure the backup lever is
in the TOWING position (up).
Trailer surge brake will not work when backup
lever is in BACKUP POSITION.
lever is in BACKUP POSITION.
2. Before towing, check position of breakaway
cable. If cable is pulled, brakes will drag and
overheat. Check periodically on long trips.
overheat. Check periodically on long trips.
BACKUP
POSITION
ONL
Y
TOWING
POSITION