Wasp Bar Code WPS100 用户手册

2-7

The scanner communicates with the user by emitting different beeper sequences and 
patterns. Table 2-1 defines beep sequences that occur during both normal scanning and 
while programming the scanner.

3 short high beeps

Power up.

Short high beep

A bar code symbol was decoded (if decode beeper 
is enabled).

4 long low beeps

A transmission error was detected in a scanned 
symbol. The data is ignored. This occurs if a unit is 
not properly configured. Check option setting.

5 low beeps

Conversion or format error.

Lo/hi/lo beep

Transmit error.

Hi/hi/hi/lo beep

Receive error.

Short high beep

Correct entry scanned or correct menu sequence 
performed.

Lo/hi beep

Input error, incorrect bar code or “Cancel” scanned, 
wrong entry, incorrect bar code programming 
sequence; remain in program mode.

Hi/lo beep

Keyboard parameter selected. Enter value using 
bar code keypad.

Hi/lo/hi/lo beep

Successful program exit with change in the 
parameter setting.

Low/hi/low/hi beep

Out of host parameter storage space. Scan 

Hi/lo beep

New Code 39 data was entered into the buffer.

3 long high beeps

Code 39 buffer is full.