Whirlpool Washer/Dryer W10558490A 用户手册

Typical installations vent the washer/dryer from the rear. Other 

installations are possible.

A

B

C

D

E

F

G
H

A. Dryer

B. Rigid metal or flexible metal vent

C. Clamps

D. Wall

E. Elbow

F. Clamps

G. Elbow

H. Exhaust hood

This washer/dryer can be converted to exhaust out the right or 

left side. To convert the washer/dryer, use Side Exhaust Kit Part 

Number 279823. If your washer/dryer was previously exhausted 

from the right or left side, it can be converted to rear exhaust by 

using standard offset connections. To cover the hole in the side, 

one of the following plugs can be added:

692790 (white)  

3979370 (graphite)  

3977784 (biscuit)

Follow the instructions in the kit to install. Kits are available from 

the dealer from whom you purchased your washer/dryer.

Venting systems come in many varieties. Select the type best 

for your installation. Three close-clearance installations are 

shown. Refer to the manufacturer’s instructions.

NOTE: The following kits for close-clearance alternate 

installations are available for purchase. 

For more information, call 

1-800-901-2042, or visit us  

at 

www.applianceaccessories.com. In Canada, call  

1-800-807-6777 or visit us at www.whirlpoolparts.ca.

Part Number Descriptions
4396028

Over-the-Top Installation

4396037

0" (0 mm) to 18" (457 mm) 

Metal vent periscope (For use with dryer vent to 

wall vent mismatch)

4396011

18" (457 mm) to 29" (737 mm) 

Metal vent periscope (For use with dryer vent to 

wall vent mismatch)

4396014

29" (737 mm) to 50" (1.27 m)  

Metal vent periscope (For use with dryer vent to 

wall vent mismatch)

4392892

In-Wall metal DuraVent

™

 Periscope

279818

4-way vent kit – white

W10186596

4-way vent kit – universal grey

4396028

Sure Connect

™

 venting kit  

(over-the-top installation)

4396009RP

5' Universal connect vent, flexible dryer venting

4396010RP

6' SecureConnect

™

 vent, flexible dryer venting

4396013RB

Dryer vent installer’s kit

4396033RP

5' flexible dryer venting with clamps

4396727RP

8' flexible dryer venting with clamps

4396004

Dryer offset elbow

4396005

Wall offset elbow

4396006RW

DuraSafe

™

 close elbow

4396007RW

Through-the-wall vent cap

4396008RP

4" steel dryer venting clamps – 2 pack

8212662

Flush mounting louvered vent hood 4"

A.  Standard rear offset exhaust installation

B.  Rear exhaust for offset close-clearance connection

C.  Left- or right-side exhaust installation

A. Loop system with standard elbows

B. Loop system with one offset and one standard elbow

C. Vent system with one periscope (2" [51 mm] clearance)