Ninja BL800 业主指南

下载
页码 16
9
TOLL FREE:
 
1-877-646-5288
11  To remove the lid, press the release button on 
the lid, pull the lid handle up to a 90° angle 
and lift the lid off. Holding the pitcher with 
one hand while removing the lid with the 
other will provide the best leverage. Turn the 
pitcher counter clockwise and then lift off the 
base. Do not pour out ingredients without first 
carefully removing the top blades. (Fig. 7
 
CAUTION: Never insert your hands into the 
pitcher as the blades are sharp. Always use a 
spatula to dislodge food that has stuck to the 
sides of the pitcher. Unplug the unit before 
attempting to dislodge anything.
12 Make sure that the unit is unplugged when 
not in use.
 TIPS: 
 
•  Use the Low setting when blending drinks 
and other blended items.
 
•  Use the Med setting when frozen blending, 
ice crushing or grinding dry ingredients.
 
•  Use the High setting when creating purees 
such as sauces, dips and restaurant quality 
glazes. For best puree results, puree using 
only the bottom blades.
 
•  For thicker consistencies, remove the lid and 
the top blades carefully (by the shaft), then 
empty the contents from the pitcher.
Assembly and Use for the 72 oz. Pitcher - cont.
USE
REMOVAL
Fig. 6
Fig. 7
  WARNING: Never leave the appliance unattended while in use.
7  Plug the motor base in for use.
8  Turn the Function Knob to the selected 
setting. (Fig. 6) To start the blender, press 
the “Start/Pulse/Stop” toggle up to start 
processing. 
NOTE: As a safety feature, the power 
indicator light ( ) will flash and the 
motor will not work if the pitcher and lid 
are not installed correctly.  
NOTE: If you need to Pulse ingredients, press 
down on the toggle in short intervals.
9  When you have reached your desired 
consistency, stop the appliance by pressing up 
on the “Start/Pulse/Stop” toggle.
 
 
10 Use the convenient pour spout when serving 
smoothies, juices and other beverages you 
have created! Push the pour spout back as 
far as it will go before pouring. For thicker 
consistencies, remove the lid and the top blades 
carefully (by the shaft), then empty the contents 
from the pitcher.  
NOTE: The pour spout has a built-in pressure 
release system to ensure a tight seal. DO NOT try 
to force this open. To snap pour spout shut, lift up 
gently on the inner piece and push down to lock.