Ninja BL800 业主指南

 

1  Store the Ninja Ultima

™ 

Dual Stage

 

 blender 

upright with the pitcher attached to the motor 

base, top blades inside the pitcher and lid 

secured tightly on the pitcher.  

 

RESETTING THE MOTOR THERMOSTAT
The Ninja Ultima

™

 Dual Stage blender 

features a unique safety system which 

prevents damage to the unit’s motor and 

drive system should you inadvertently 

overload your appliance. If the appliance is 

being overloaded, the motor will stop and 

the power indicator light will flash. To reset 

the appliance, follow the resetting procedure 

below:

1  Unplug the appliance from the electrical 

outlet.

2  If using the top blades, carefully remove them 

by the shaft, ensuring that no food is jamming 

the top or bottom cutting blades.

 

CAUTION: The blades are extremely sharp 

- handle with care! Always hold the top 

3  Allow the appliance to cool for approximately 

15 minutes.

4  Re-install the container onto the base, 

carefully re-insert the top blades (if using) and  

re-plug the appliance into the electrical outlet.

 

NOTE: Ensure that the blades are seated 

properly by standing the blades upright in 

the jar. If the blades are not seated properly 

on the star-shaped post, carefully check the 

underside of the top blade assembly to ensure 

there’s no food in the way. Rinse if necessary. 

Do not operate if the top blades are not 

upright at any time.

5  Proceed to use the appliance as before, 

making sure not to exceed the recommended 

maximum capacities.

 

 

CAUTION: Make sure that the motor base 

is unplugged from the power source before 

inserting or removing any attachment and 

before cleaning.

 

CAUTION: DO NOT immerse the motor base 

into water or any other liquid.  

1  Separate/remove all parts from each other.
2  Clean the motor base with a damp cloth and 

wipe dry.  

3  Place the pitcher in the dishwasher. Place 

the lid and attachments on the top rack. 

 

NOTE: You may also wash the pitcher by filling 

¾ of the pitcher with warm water and a drop 

of dish washing detergent, placing the lid on 

and pressing the pulse button a few times. 

Once clean, remove the pitcher from the motor 

base. Rinse the pitcher, attachment and lid 

under running water. Allow all the parts to dry 

before storing.

 

Please call customer service if any servicing 

needs to be performed on the appliance at 

1-877-646-5288.