Raritan Computer Paragon II 255-30-6000-00 用户手册
Authentication with a Smart Card
82
3. After logging into the system, the Selection Menu appears on the
screen.
4. Press Ï, Ð, Í or Î to move the highlight to the desired server
which is connected to the reader‐enabled CIM (P2CIM‐AUSB‐C).
5. Press Enter to access the server. See Selecting a Server (on page 47)
for more details.
6. If the client authentication software has been configured properly,
either a blank screen or a message prompting you to insert the card
appears. The message varies depending on the configuration of your
authentication software.
appears. The message varies depending on the configuration of your
authentication software.
7. Insert your card into the card reader slot on the user station. The LED
of the user station turns green.
Note: The Paragon II integrated smart card reader may not recognize
the insertion of a smart card when there is conflict with an external
card reader, including keyboards that consist of a built‐in smart card
reader. When there is conflict with an external reader, the LED on the
user station (which normally turns from blue to green when a card is
inserted) will not react to the insertion of the card.
the insertion of a smart card when there is conflict with an external
card reader, including keyboards that consist of a built‐in smart card
reader. When there is conflict with an external reader, the LED on the
user station (which normally turns from blue to green when a card is
inserted) will not react to the insertion of the card.
8. The card reader reads the data of the card and transmits the data to
the server. Follow the serverʹs onscreen instructions, if any, to
complete the login authentication process.
For more information on completing the authentication process, see
the user documentation provided with your systemʹs authentication
software or contact your system administrator.
complete the login authentication process.
For more information on completing the authentication process, see
the user documentation provided with your systemʹs authentication
software or contact your system administrator.
IMPORTANT: Whenever the card reader is reading and
transmitting the data (indicated by the green blinking LED), do
NOT do anything that interrupts the transmission, such as the
removal of the card or CIM, turning off the Paragon switch or
server, and so on. Doing this may cause abnormal function and
require you to restart all of the devices in order to return to normal
operation.
transmitting the data (indicated by the green blinking LED), do
NOT do anything that interrupts the transmission, such as the
removal of the card or CIM, turning off the Paragon switch or
server, and so on. Doing this may cause abnormal function and
require you to restart all of the devices in order to return to normal
operation.
The Paragon system does not allow you to switch to any server
during the transmission of the cardʹs data. When attempting to do so,
the system displays the message below on the OSUI.
during the transmission of the cardʹs data. When attempting to do so,
the system displays the message below on the OSUI.
9. Once you pass the authentication process, you are allowed to view
and manage the server.