Raritan Computer Paragon II 255-30-6000-00 用户手册
Chapter 3: Operation - User Functions
81
Note: An external USB card reader is not supported at this time.
Features of P2CIM-AUSB-C
This device is a USB CIM and is required when using a smart card.
Its functions are similar to those of P2CIM‐AUSB and can work with
Paragon II that has been upgraded to version 4.3 or later.
Paragon II that has been upgraded to version 4.3 or later.
Paragon II 4.3 or Later Firmware Version
As long as the card reader function is intended in the Paragon II system,
you must ensure the firmware version of the Paragon switch (or switches)
in the chosen path is 4.3 or later. Otherwise, the card reader function is
not available even though both of the reader‐enabled user station and
CIM are present in the path.
you must ensure the firmware version of the Paragon switch (or switches)
in the chosen path is 4.3 or later. Otherwise, the card reader function is
not available even though both of the reader‐enabled user station and
CIM are present in the path.
To upgrade the firmware version of existing Paragon switches to 4.3 or
later, including Paragon I HW3 and Paragon II, see Firmware Upgrade
(on page 153) for additional information.
later, including Paragon I HW3 and Paragon II, see Firmware Upgrade
(on page 153) for additional information.
Using the Card Reader
Once all required reader‐enabled components are installed in the Paragon
system, and the proper driver and authentication software have been
configured in the servers, the card reader authentication is ready for use.
system, and the proper driver and authentication software have been
configured in the servers, the card reader authentication is ready for use.
Note that when you connect the P2‐EUST/C user station to the Paragon
Base Unit with 4.3 or later firmware version, the whole system
comprising the Base Unit and its tiers enters the Private Mode regardless
of the original Operation Mode setting. This is to ensure that only the
user that has validated his or her credentials may view the serverʹs video
output.
Base Unit with 4.3 or later firmware version, the whole system
comprising the Base Unit and its tiers enters the Private Mode regardless
of the original Operation Mode setting. This is to ensure that only the
user that has validated his or her credentials may view the serverʹs video
output.
1. Using the P2‐EUST/C, verify that the user station is connected to a
keyboard/mouse/VGA monitor, and is powered on. See Basic
Installation (on page 12) for more details.
Installation (on page 12) for more details.
2. Log in to the Paragon system by typing a valid user name and
password and then pressing Enter. See Login (on page 42) for more
details.
details.