Raritan Computer Paragon II 255-30-6000-00 用户手册
General Update Procedure
154
7. (Optional) For some versions, such as version 4.2, the associated
release notes are not covered in the downloaded firmware file, so
locate the release notes and download it by repeating the above steps
4 to 6.
locate the release notes and download it by repeating the above steps
4 to 6.
8. Read the release notes for any necessary information.
¾
STEP 2: Establish a connection between the device and
the PC running Paragon Update
The device intended to upgrade must be connected to the PC that will run
the Paragon Update utility. There are two types of connections
depending on your device.
the Paragon Update utility. There are two types of connections
depending on your device.
• Network: If your device comes with a LAN port, such as Paragon II
Main Unit, upgrade it by connecting it to the network and assigning
an IP address to it. However, for Paragon II Stacking Unit, it must be
upgraded by connecting to the Main Unit which is connected to the
network.
an IP address to it. However, for Paragon II Stacking Unit, it must be
upgraded by connecting to the Main Unit which is connected to the
network.
• RS‐232 Cable: For those devices without the network port, such as
user stations, this is the only method to upgrade them. Connect the
device to one of the serial ports of the PC that runs the Paragon
Update utility via the RS‐232 cable.
device to one of the serial ports of the PC that runs the Paragon
Update utility via the RS‐232 cable.
Note: One DB9 male‐to‐female serial (RS‐232) cable is shipped with
the user station. It is a direct cable that can be used to upgrade the
firmware with TXD, RXD and GND signals.
the user station. It is a direct cable that can be used to upgrade the
firmware with TXD, RXD and GND signals.