Raritan Computer Paragon II 255-30-6000-00 用户手册
Chapter 8: Firmware Upgrade
155
¾
STEP 3: (Optional) Verify the stacking-related
configuration
This step is necessary when any Stacking Unit is connected to the Main
Unit and the firmware upgrade of Stacking Units is also desired. For
regular firmware upgrade which does not involve the boot loader or
failsafe feature, Paragon allows you to update the Main Unit and “ALL”
Stacking Units that are connected to it in one single operation.
Unit and the firmware upgrade of Stacking Units is also desired. For
regular firmware upgrade which does not involve the boot loader or
failsafe feature, Paragon allows you to update the Main Unit and “ALL”
Stacking Units that are connected to it in one single operation.
Before upgrading the Stacking Units, ensure these requirements are met.
• The Stacking Units are properly connected to the Main Unit and
powered on.
• The “Stacking Support” setting in the Main Unit corresponds to the
number of connected Stacking Units—that is, if there are three
Stacking Units connected to the Main Unit, set the setting to 3. See the
“Stacking Support” section under Paragon II Front Panel Display
and Controls (on page 16) for additional information.
Stacking Units connected to the Main Unit, set the setting to 3. See the
“Stacking Support” section under Paragon II Front Panel Display
and Controls (on page 16) for additional information.
• The value of the “Set Stack ID” setting in every connected Stacking
Unit is unique: 1 up to 3. See Installing the Paragon P2‐UMT832S
Stacking Unit (on page 35) for additional information.
Stacking Unit (on page 35) for additional information.
Note: For “special” firmware upgrade involving the boot loader or
failsafe feature, only one Stacking Unit is allowed to be connected to the
Main Unit at one time. See the Stacking Units (on page 159) section of
Failsafe Upgrade Feature (on page 156) for more information.
failsafe feature, only one Stacking Unit is allowed to be connected to the
Main Unit at one time. See the Stacking Units (on page 159) section of
Failsafe Upgrade Feature (on page 156) for more information.
¾
STEP 4: Launch the Paragon Update utility
Specify the device(s) to upgrade and the appropriate firmware in the
Paragon Update utility. Note that Paragon Update utilized to upgrade
devices must be the latest version downloaded along with the firmware.
This is to ensure the upgrade is performed successfully. The update
utilityʹs filename is “ParagonUpdate_xxx.exe” (xxx represents the
version).
Paragon Update utility. Note that Paragon Update utilized to upgrade
devices must be the latest version downloaded along with the firmware.
This is to ensure the upgrade is performed successfully. The update
utilityʹs filename is “ParagonUpdate_xxx.exe” (xxx represents the
version).
1. Double click “ParagonUpdate_xxx.exe.” The Paragon Update
window appears.
2. Enter the information of the device that you want to upgrade in the
Paragon Update utility, including the deviceʹs name, IP address or
the number of the serial port where the device connects, and so on.
the number of the serial port where the device connects, and so on.
3. Select the device by selecting its checkbox ( ).
4. Click Load Hex File and navigate to select the appropriate firmware
file.