Raritan Computer Paragon II 255-30-6000-00 用户手册
Initial Configuration
26
P2CIM‐APS2 (IBM PS/2 compatible servers) or
P2CIM‐APS2‐B (IBM BladeCenter Management Module with
PS/2 ports):
PS/2 ports):
Plug the HD15 strand into the server’s HD15 VGA video port.
Plug the purple 6‐pin mini‐DIN keyboard strand into the server’s
6‐pin mini‐DIN keyboard port. Plug the light green 6‐pin
mini‐DIN strand into the server’s 6‐pin mini‐DIN mouse port.
Plug the purple 6‐pin mini‐DIN keyboard strand into the server’s
6‐pin mini‐DIN keyboard port. Plug the light green 6‐pin
mini‐DIN strand into the server’s 6‐pin mini‐DIN mouse port.
P2CIM‐ASUN (Sun compatible servers):
Plug the HD15 strand into the server’s HD15 VGA video port.
Plug the 8‐pin mini‐DIN strand into the server’s 8‐pin mini‐DIN
keyboard/mouse port.
Plug the 8‐pin mini‐DIN strand into the server’s 8‐pin mini‐DIN
keyboard/mouse port.
P2CIM‐AUSB, P2CIM‐AUSB‐C, or P2CIM‐AUSB‐B (IBM
BladeCenter Management Module with USB ports):
Plug the HD15 strand into the server’s HD15 VGA video port.
Plug the USB Type A strand into one of the server’s USB Type A
ports.
Plug the USB Type A strand into one of the server’s USB Type A
ports.
P2CIM‐APS2DUAL (IBM PS/2 compatible servers):
Connect keyboard, monitor, and mouse cables attached to the
CIM to the appropriate 15‐pin female video port and 6‐pin
mini‐DIN mouse and keyboard ports on the server.
CIM to the appropriate 15‐pin female video port and 6‐pin
mini‐DIN mouse and keyboard ports on the server.
P2CIM‐SER, P2CIM‐SER‐EU and AUATC (serial servers,
routers, and so on):
Please see Connecting Serial Devices to Paragon II System (on
page 188) for installation instructions.
page 188) for installation instructions.
P2ZCIM and Z‐CIM (local single‐user IBM PS/2 compatible
servers):
Please see Paragon II and P2ZCIMs/Z‐CIMs (on page 116) for
installation instructions.
installation instructions.
b. Plug in and power on the server. If the CIM is installed and
operating properly, the CIM’s green LED will start blinking: once
per second while the CIM is idle, more quickly while data is
transmitted in either direction.
per second while the CIM is idle, more quickly while data is
transmitted in either direction.
c. Connect one end of a Cat 5 UTP cable to channel port #1 on the
back of the Paragon switch. Connect the other end of the cable to
the RJ45 port on the CIM.
the RJ45 port on the CIM.
6. Configure the CIM and the attached server.