Raritan Computer Paragon II 255-30-6000-00 用户手册
Chapter 3: Operation - User Functions
79
4
Paragon II switch (firmware version 4.3 or later)
5
P2‐EUST/C
Warning!! The maximum cable length between the reader‐enabled
CIM and the Paragon switch to which it is directly connected
CANNOT exceed 500 feet (152 m). A cable longer than 500 feet may
result in the cardʹs data loss during the transmission.
CIM and the Paragon switch to which it is directly connected
CANNOT exceed 500 feet (152 m). A cable longer than 500 feet may
result in the cardʹs data loss during the transmission.
If the path runs through the second‐ or even third‐tier Paragon switches,
the firmware version of these upper tiers must also be 4.3 or later.
Otherwise, the card reader function in the path will not be enabled. For
information on connecting user stations, CIMs, servers and Paragon
switches, see Basic Installation (on page 12).
the firmware version of these upper tiers must also be 4.3 or later.
Otherwise, the card reader function in the path will not be enabled. For
information on connecting user stations, CIMs, servers and Paragon
switches, see Basic Installation (on page 12).
Notes:
¾ A Paragon Main Unit is not used when in Direct Mode. In Direct Mode,
only P2‐EUST/C and P2CIM‐AUSB‐C are required to activate the card
reader functionality. See User Station Direct Mode (on page 178) for more
details.
¾ P2‐HubPac does not support the card reader functionality at this time.
Therefore, make sure the servers that require the card reader
authentication are not connected to the Paragon switch via P2‐HubPac.
¾ A Paragon Main Unit is not used when in Direct Mode. In Direct Mode,
only P2‐EUST/C and P2CIM‐AUSB‐C are required to activate the card
reader functionality. See User Station Direct Mode (on page 178) for more
details.
¾ P2‐HubPac does not support the card reader functionality at this time.
Therefore, make sure the servers that require the card reader
authentication are not connected to the Paragon switch via P2‐HubPac.
Features of P2-EUST/C
This device is an enhanced user station with a built‐in card reader.
Its functions are similar to those of P2‐EUST and can work with Paragon
II that has been upgraded to version 4.3 or later. The internal card reader
allows users to insert their smart cards when prompted by the
authentication software installed in the servers, and deliver the necessary
authentication data to the server. The P2‐EUST/C is compatible with all
CIMs that are compatible with the standard P2‐EUST. This allows for use
of the P2‐EUST/C in environments that also include servers that do not
require the card authentication.
II that has been upgraded to version 4.3 or later. The internal card reader
allows users to insert their smart cards when prompted by the
authentication software installed in the servers, and deliver the necessary
authentication data to the server. The P2‐EUST/C is compatible with all
CIMs that are compatible with the standard P2‐EUST. This allows for use
of the P2‐EUST/C in environments that also include servers that do not
require the card authentication.
Comparison between P2-EUST/C and P2-EUST
Components / Functions
P2-EUST/C P2-EUST
USB Keyboard/Mouse Support
PS/2 Keyboard/Mouse Support
Sun Keyboard/Mouse Support
Automatic Skew Compensation