Royal Pacific ROYAL PARTY 353794 用户手册
8
cooking will keep the burner clean. The
burner should be removed and cleaned
annually, or whenever heavy build-up is
found, to ensure that there are no signs of
blockage (debris, insects) in either the burner
portholes or the venturi tubes. Use a pipe
cleaner to clear obstructions. A wire brush
can be used to remove corrosion from the
burner surfaces. When refitting the burner, be
careful to check that the venturi tubes of the
burner fit over the valve outlets.
c. Lava Rock (if applicable)
It is not necessary to remove and wash the
lava rock in order to keep it clean. Burning off
the residue after each cooking should be
sufficient. Heavily impregnated lava rock
should be turned over so that the dirty side
faces the burners in order to burn off any
residue.
d. Barbecue Body
Regularly remove excess grease or fat from
the barbecue body with a soft plastic or
wooden scraper. It is not necessary to
remove all the grease from the body. If you
need to clean fully, use hot soapy water and a
cloth, or nylon-bristled brush only. Remove
cooking surfaces and burners before full
cleaning. Do not immerse the gas controls or
manifold in water. Check burner operation
after carefully refitting into body.
e. Fixings
All screws and bolts, etc. should be checked
and tightened on a regular basis.
f. Storage
Store your barbecue in a cool dry place.
Cover the burners with aluminium foil in order
to prevent insects or other debris from
collecting in burner holes. If the barbecue is to
be stored indoors, the gas bottle must be
disconnected and left outside. The gas bottle
should always be stored outside, in a dry,
well-ventilated area, away from any sources
of heat or ignition. Do not let children tamper
with the bottle.
burner should be removed and cleaned
annually, or whenever heavy build-up is
found, to ensure that there are no signs of
blockage (debris, insects) in either the burner
portholes or the venturi tubes. Use a pipe
cleaner to clear obstructions. A wire brush
can be used to remove corrosion from the
burner surfaces. When refitting the burner, be
careful to check that the venturi tubes of the
burner fit over the valve outlets.
c. Lava Rock (if applicable)
It is not necessary to remove and wash the
lava rock in order to keep it clean. Burning off
the residue after each cooking should be
sufficient. Heavily impregnated lava rock
should be turned over so that the dirty side
faces the burners in order to burn off any
residue.
d. Barbecue Body
Regularly remove excess grease or fat from
the barbecue body with a soft plastic or
wooden scraper. It is not necessary to
remove all the grease from the body. If you
need to clean fully, use hot soapy water and a
cloth, or nylon-bristled brush only. Remove
cooking surfaces and burners before full
cleaning. Do not immerse the gas controls or
manifold in water. Check burner operation
after carefully refitting into body.
e. Fixings
All screws and bolts, etc. should be checked
and tightened on a regular basis.
f. Storage
Store your barbecue in a cool dry place.
Cover the burners with aluminium foil in order
to prevent insects or other debris from
collecting in burner holes. If the barbecue is to
be stored indoors, the gas bottle must be
disconnected and left outside. The gas bottle
should always be stored outside, in a dry,
well-ventilated area, away from any sources
of heat or ignition. Do not let children tamper
with the bottle.
9. Technical Specifications
Specifications are subject to change without prior
notice.
CE
Approval
Heat
Input
Burner
Controls
Injector
Size
Gas /
Pressure
Royal
Party
0359
359BR239
6.2kW
2
0.89mm
Butane/
28mbar
28mbar
Propane/
37mbar
Gas Consumption: 446g/hr
Countries of Use:
I
I
3+(28- 30/37)
BE, CY, CZ, EE, FR, GR, IE, IS, IT, LV, LT, LU, PT,
SK,
ES, CH, GB
I
ES, CH, GB
I
3B/P(30)
CY, CZ, DK, EE, FI, GR, LV, LT, LU, MT, NL, NO, SK, SI,
SE, TR
I
I
3B/P(50)
AT, DE, HU, SK, CH
I
3B/P(36)
PL