ONKYO A-9377 用户手册

12

The A-9377’s PHONO input is designed for use with a 
turntable fitted with a moving-magnet (MM) cartridge.
Use an analog audio cable to connect the A-9377’s 
PHONO L/R jacks to the audio output jacks on the turn-
table, as shown. If there are RCA shorting plugs in the 
jacks, remove them before connecting.

Notes:
• If the turntable has a ground wire, connect it to 

A-9377’s GND terminal. With some turntables, con-
necting the ground wire may cause hum, in which case 
it should be disconnected.

• If the turntable has a moving-coil (MC) type cartridge, 

you’ll need a commercially available MC head amp or 
transformer. In this case, connect the turntable to the 
head amp or transformer, and connect that to the 
A-9377’s PHONO L/R jacks.

Use an analog audio cable to connect the A-9377’s CD 
L/R jacks to the analog audio output jacks on the CD 
player, as shown.

Use an analog audio cable to connect the A-9377’s 
TUNER L/R jacks to the analog audio output jacks on 
the tuner, as shown.

• Always refer to the instruction manual that came 

with the component you are connecting.

• Do not plug in the power cord until all connections 

have been made.

■ RCA Connection Color Coding

• Red connectors are used for the right channel, and 

white connectors are used for the left channel.

• Push each plug in all the 

way to make a good connec-
tion (loose connections can 
cause noise or malfunc-
tions).

• Do not bind audio cables with power cords and 

speaker cables. Doing so may adversely affect the 
sound quality.

• To prevent interference, keep power cords and 

speaker cables away from the tuner’s antenna.

Ground wire