Viking VESO5272SS 手册
20
21
Timer Alarm
At the end of a Min/Sec Timer program or Bake Hours program, the alarm
will consist of three beeps followed by two beeps every 10 seconds until
the “MIN/SEC TIMER” button is pressed. Whenever a valid function key
is pressed or when a control function starts automatically, one beep will be
sounded. When an invalid function key is pressed, two beeps will be
sounded.
will consist of three beeps followed by two beeps every 10 seconds until
the “MIN/SEC TIMER” button is pressed. Whenever a valid function key
is pressed or when a control function starts automatically, one beep will be
sounded. When an invalid function key is pressed, two beeps will be
sounded.
Setting the Automatic Start Time Bake Program
The Bake Hours and Start Time modes of the timer can be used to
automatically turn the oven on and off at a preselected time. The
Automatic Time Bake program is ideal for foods with no danger of
spoilage during the time the oven is left off.
automatically turn the oven on and off at a preselected time. The
Automatic Time Bake program is ideal for foods with no danger of
spoilage during the time the oven is left off.
To Set The Automatic Time Bake Program:
1. Set the start time:
A) For Single Ovens – Program the start time by pressing the “START
TIME” button and turning the “SET” knob until the desired start time is
displayed. This is the time of day you want the food to begin cooking.
TIME” button and turning the “SET” knob until the desired start time is
displayed. This is the time of day you want the food to begin cooking.
B) For Double Ovens – Press the “START TIME” button once to set
the starting time for the upper oven (UPPER OVEN will show on the
display). Press the “START TIME” button twice to set the starting time
for the lower oven (LOWER OVEN will show on the display). Then
program the start time by turning the “SET” knob until the desired
start time is displayed. This is the time of day you want the food to
begin cooking.
the starting time for the upper oven (UPPER OVEN will show on the
display). Press the “START TIME” button twice to set the starting time
for the lower oven (LOWER OVEN will show on the display). Then
program the start time by turning the “SET” knob until the desired
start time is displayed. This is the time of day you want the food to
begin cooking.
2. Set the desired baking time:
Once the start time is set, the display will switch to :00 and
the words SET, COOK and TIME will appear on the right side of the
display. You will now enter the desired baking time.
Turn the “SET” knob until the desired baking time is displayed in hours
and minutes. Once the desired bake time is set, the word SET will
disappear and the word DELAY will appear in the display indicating
that the Bake Hours program has been set.
the words SET, COOK and TIME will appear on the right side of the
display. You will now enter the desired baking time.
Turn the “SET” knob until the desired baking time is displayed in hours
and minutes. Once the desired bake time is set, the word SET will
disappear and the word DELAY will appear in the display indicating
that the Bake Hours program has been set.
NOTE: For Double Ovens, the word DELAY will show with either UPPER
OVEN or LOWER OVEN depending on which oven has been selected.
OVEN or LOWER OVEN depending on which oven has been selected.
3. Set the Oven Function selector to the desired function – BAKE,
CONVECTION BAKE, OR TRUCONVEC™, etc.
Product
Controls
Product
Controls
Clocks and Timers
((D
Diig
giitta
all D
Diissp
plla
ayy -- S
Se
elle
ecctt // F
Frre
en
ncch
h D
Do
oo
orr M
Mo
od
de
ellss))
4. Set the temperature control knob to the desired baking
temperature.
5. The automatic time bake program is now set!
NOTE: The display will continue to show the amount of bake
time that was programmed (this will remain until the programmed
start time is reached). You can return the display to clock mode
by pressing the “CLOCK” button on the Select models or
“PROBE” on the French door models. Notice that a small clock
will be displayed in the upper right corner to indicate that a
program is in progress. Switch back to the timer mode by
pressing the “BAKE HOURS” button.
time that was programmed (this will remain until the programmed
start time is reached). You can return the display to clock mode
by pressing the “CLOCK” button on the Select models or
“PROBE” on the French door models. Notice that a small clock
will be displayed in the upper right corner to indicate that a
program is in progress. Switch back to the timer mode by
pressing the “BAKE HOURS” button.
6. When the specified time is reached, the oven will
automatically turn on. It will bake for the programmed amount
of time at the selected temperature.
of time at the selected temperature.
NOTE: At one minute from the end of the specified bake
program, the oven timer will beep once. At the end of the
specified bake program, the oven will automatically turn off and
the timer will sound a series of three beeps. This will continue
until the “START TIME” button is pressed. The display will then
return to displaying the time.
program, the oven timer will beep once. At the end of the
specified bake program, the oven will automatically turn off and
the timer will sound a series of three beeps. This will continue
until the “START TIME” button is pressed. The display will then
return to displaying the time.
NOTE: Setting the remaining duration time to :00 will cancel the
Automatic Bake program.
Automatic Bake program.
Clocks and Timers
((D
Diig
giitta
all D
Diissp
plla
ayy -- S
Se
elle
ecctt // F
Frre
en
ncch
h D
Do
oo
orr M
Mo
od
de
ellss))