Best UP26M42SB 安装指导

6

NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.

Make sure that the following items are included:

- Range 

hood

-  Accessories:  •  Hybrid baffle filters with handles

 

•  Shielded halogen bulbs (120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base)

 

•  Bag of parts including:  4 lock nuts no. 10-32, 1 wire clamp LP16-AP, 2 no. 6 x 1/2” screws,

2 wire connectors no. 74B, 6 no. 8 x 3/8”, 8 double threaded screws 6-12 x 1/2”

Parts sold separately:

•  Interior blower Model P5 or P8 includes blower, rough-in kit, flow deviator and 3¼” x 10” or 3¼” x 14” adapter

•  Interior blower Model iQ6, P3 or P6 includes blower, rough-in kit, adapter/damper

•  In-line blower assembly ILB3, ILB6, ILB9 or ILB11 (all include transition(s) and rough-in plate)

•  Exterior blower assembly EB6, EB9, EB12 or EB15 (all include rough-in plate)

• Backsplash 

(optional)

•  Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.

NOTE: For cabinets with recessed bottom, attach wood filler strips (not included) on each sides, as shown below. Use two 2-inch wide 

strips for 30” wide hoods, and four 2-inch wide strips for wider hoods, cut to length. See below for wood filler strip locations.

30”

2”

N/A

N/A

36”

2”

4½”

4½”

42”

2”

7¼”

8¼”

48"

4”

10¼”

11¼”

HD0079

A

A

B

C

Backsplash must be installed before the hood shell because the hood shell covers the backsplash top mounting screws. In order to be 
able to install the backsplash, ensure to have at least 18” clearance between bottom of hood and range control panel or cooktop. (See 
instructions packed with backsplash.)

INTERIOR BLOWER: Follow all subsequent steps of this manual.

EXTERIOR BLOWER: Refer to instructions packed with exterior blower and follow steps 5, 8, 11,12, 16 and up of the present manual.