Best UP26M42SB 安装指导
7
6. CHOOSE THE OPENING (P5
AND
P8
BLOWERS
ONLY
)
Removing horizontal knockout opening on back of hood.
CAUTION
If using P5 blower, remove 10” wide knockout. If using P8 blower, remove either 10” or 14” wide knockout.
Remove the knockout for the chosen opening (horizontal at the back of the hood or vertical on rough-in plate). See pictures below.
14”
KNOCKOUT
10”
KNOCKOUT
HD0076
14”
KNOCK
OUT
HD0077
10”
KNOCK
OUT
Removing vertical knockout opening on rough-in plate.
5. REMOVE FILTERS AND BOTTOM PANEL (A
LL
BLOWERS
)
Lay the hood flat on a table. Use a piece of cardboard to avoid
damaging the table or the hood.
damaging the table or the hood.
Remove tape on filters. Remove filters from hood and set aside.
NOTE: It is recommended to start with the center one(s).
HD0542
HD0541
R
ETAINING
SCREWS
B
OTTOM
PANEL
Remove bottom panel both retaining screws. Set bottom panel and screws aside.
HD0544
1
3
2