Frigidaire FGMC3065PB 业主指南

27

The TIMER and SELF CLEAN pads control the Continuous 

Bake or 6 Hour Energy Saving features. The oven control has 

a factory preset built-in 6 Hour Energy Saving feature that 

will shut off the oven if the oven control is left on for more 

than 6 hours. The oven can be programmed to override this 

feature for Continuous Baking.

1.  Press and hold TIMER for 6 seconds. 

 

After 6 seconds "6Hr OFF" or "StAY On" will appear 

in the display and the control will beep once.

2. Press 

SELF CLEAN to switch between the 6 Hour Energy 

Saving and continuous bake features. 

Note: "6Hr OFF" in the display indicates the control is set for 

the 6 Hour Energy Saving mode and "StAY On" indicates 

the control is set for the Continuous Bake feature.

3. Press 

START to accept the change (display will return 

to time of day) or press OFF to reject the change.

The  DELAY START and SELF CLEAN pads control the 

Silent Control operation feature. The Silent Control operation 

feature allows the oven control to be operated without 

sounds or beeps whenever necessary. If desired the control 

can be programmed for silent operation and later returned 

to operating with all the normal sounds and beeps.

1.  To tell if your range is set for normal or silent operation 

press and hold DELAY START. "-- --" will appear and 

"DELAY" will fl ash in the display. After 6 seconds "bEEP 

On" or "bEEP OFF" will appear in the display.

2. Press SELF CLEAN to switch between normal sound 

operation and silent operation mode. The display will 

show either "bEEP On" or "bEEP OFF".

 

Note: If "bEEP On" appears, the control will operate 

with normal sounds and beeps. If "bEEP OFF" appears, 

the control is in the silent operation mode.

3. Press START to accept the change or press OFF to 

reject the change.

Note: The control will always beep at the end of a minute 

timer and will beep when a set temperature has been reached, 

even if the control is set to silent operation.

The BROIL and SELF CLEAN pads control the Fahrenheit 

or Celsius temperature display modes. The oven control can 

be programmed to display temperatures in Fahrenheit or 

Celsius. The oven has been preset at the factory to display 

in Fahrenheit.

1.  To tell if the display is set for Fahrenheit or Celsius press 

BROIL and hold it for 6 seconds; "550°" will appear and 

"BROIL" will fl ash in the display and a beep will sound. 

If "F" appears, the display is set to show temperatures 

in Fahrenheit. If "C" appears, the display is set to show 

temperatures in Celsius.

2. Press SELF CLEAN to switch between Fahrenheit or 

Celsius display modes. The display will show either "F" 

or "C".

3. Press START to accept the change or press OFF to 

reject the change.