Viking RVCH330X 安装指导

BACKSPLASH

The backsplash is used to cover the wall space
between the top of the backguard or high shelf
and the bottom of the hood.

Place the backsplash in the desired location.
Secure  to  the  wall  by  placing  the  screws  that  are
provided  in  the  holes  on  the  backsplash.    When
screws  are  used  to  fasten  the  panel  to  materials
other  than  wood,  the  appropriate  type  anchor
should be used with the screws.

Backsplash

Screw
holes

WARMING SHELF PANEL

Always install the warming shelf panel
before installing the rangehood.

The warming shelf panel is usually
placed on the wall just below the
rangehood.
1. Place the bottom of the warming

shelf panel in the desired location
and secure to the wall.

2. Hook the bottom of the top

section to the top of the bottom
section and secure to the wall.

3. Install the rangehood so that it will

rest on the top ledge of the
warming shelf panel.

BOTTOM

TOP

Hook top section
to bottom section

Hood should rest on this top ledge

HOOD DUCT COVER

1. Mount duct cover to the ceiling through the screw holes provided. Secure to solid ceiling joists

to support the weight with the screws provided.

2. For wall hood models, after mounting the duct cover to the ceiling, attach the hood to the wall

and then secure the hood to duct cover using the sheet metal screws provided.

3. For island hood models, after mounting the duct cover to the ceiling, secure the hood by

tightening the bolts into the cage-nuts of the duct cover.

WALL RANGEHOOD DUCT COVER

ISLAND RANGEHOOD DUCT COVER

Larger holes on

top

Smaller holes
on bottom

sheet metal screws

bolts

Cage nuts
on bottom