Dacor DCT305BNG 手册

5

Never attempt to operate the cooktop with any of the 

burner parts removed. Assemble the burners and grates 

only when the cooktop is cool.

SimmerSear Burner

1.  Install the SimmerSear burner ring on the 

SimerSear burner base (located on the center 

of the cooktop). Line up the indentations on the 

bottom of the burner ring with the pins on top of 

the burner base.

2.  Set the outer SimmerSear burner cap on top of 

the burner ring. Make sure it is centered on top. 

3.  Set the inner SimmerSear burner cap on the 

center of the burner base. Line up the ridge 

on the bottom of the cap with the pins on the 

center of the burner base.

Setting Up Your Cooktop

Inner burner cap

Outer burner cap

Burner ring

Pin on 

burner base

Ridge on bottom

(Center Burner)

Igniter hole

Burner ring, 

top view

Igniter

Burner base

Ridge on bottom 

of burner cap

CAUtION: Top of 

igniter is sharp!

Igniter hole

Burner ring, 

top view

Igniter

Burner base

Tabs on bottom of 

burner cap

CAUtION: Top of 

igniter is sharp!

Standard Burners

1.  Install the standard burner rings on the standard 

burner bases (match sizes). Put the holes on the 

edge of each ring over the igniter. Center the 

tabs on the bottom of each ring in the hole in 

the center of each base.

2.  Install all the standard burner caps. The ridge 

on the bottom of each cap must surround the 

top of each ring. On model DCT305, the left rear 

burner cap has tabs on the bottom that fit into 

the slots on the top of the burner ring.

    continued...

Burner Assembly