Whirlpool WDT780SAEM 业主指南

This information covers several different models. Your dishwasher may not have all of the cycles and options described. Estimated cycle 
times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. 

You can customize 

your cycle by selecting an option. 

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change 
an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not used to 
hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle. This is 
normal and will provide optimal cleaning performance. 

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the 
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle 
will automatically compensate by adding time, heat and water as needed.

The most advanced and versatile cycle. This cycle senses soil amount and toughness 
of soil to adjust the cycle for improved performance using only the amount of water and 
energy needed. Use for all soil levels.

2:30

3.38 to 7.4

(12.8 to 28.0)

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

3:28

7.4

(28.1)

This cycle with only the Heat Dry option selected, and without other options selected, is 
recommended to completely wash and dry a full load of normally soiled dishes. The 
energy usage label is based on this cycle and option combination.

2:32

2.4 to 7.4

(9.09 to 28)

For fast results, 1- Hour Wash will clean dishes using slightly more water and energy. 
Select the Heat Dry option to provide best dry performance.

1:00

7.87 (29.8)

This cycle quietly soaks dishes with an extended prewash which eliminates the need to 
presoak dishes saving personal time and effort. For optimal cleaning results during the 
Soak & Clean cycle, add prewash detergent. Use this cycle for loads with heavy 
amounts of dried on or hard to clean baked-on food. 

7:31

7.4 (28.0)

Activates the TargetClean™ spray jets and provides 
intensified water spray to the back of the lower level 
rack.
May add heat and time to the cycle.

Raises main 
wash temperature 
from 105°F 
(41°C) to120°F 
(49°C).

Raises main wash temperature to improve cleaning 
for loads containing tough, baked-on food.

Raises the main 
wash temperature 
to 135°F (57°C).