OceanAire 2OACH3634 手册
INSTALLATION INSTRUCTIONS
RECEIVING—INSPECTION
:
Upon receiving your CONVERTIBLEAIRE unit, inspect the packaging
for any damage. All units are shipped on a skid, and packaged in a
triple-wall carton for added protection. In shipment, some wear may
occur on the packaging. If the packaging is heavily damaged or broken,
file a claim with the freight company immediately. Carefully unpack the
unit and remove all wrapping materials. Save all documentation and fill
out the Warranty Card and mail it to Oceanaire.
BEFORE INSTALLING
for any damage. All units are shipped on a skid, and packaged in a
triple-wall carton for added protection. In shipment, some wear may
occur on the packaging. If the packaging is heavily damaged or broken,
file a claim with the freight company immediately. Carefully unpack the
unit and remove all wrapping materials. Save all documentation and fill
out the Warranty Card and mail it to Oceanaire.
BEFORE INSTALLING
Check the air conditioner/spot cooler for any damage. All Oceanaire
products are thoroughly inspected at the factory and carefully
packaged. If any damage is evident, file a claim with the delivering
carrier immediately.
ELECTRICAL REQUIREMENTS
products are thoroughly inspected at the factory and carefully
packaged. If any damage is evident, file a claim with the delivering
carrier immediately.
ELECTRICAL REQUIREMENTS
Check the nameplate located on the back of the unit to make certain
that the proper power is available for the unit. Refer to "Specifications"
section for voltage and amperage requirements. For proper NEMA
receptacles, refer to "Electrical service plug configuration". When using
extension cords, use the properly sized cord, and check cord voltage to
the unit.
that the proper power is available for the unit. Refer to "Specifications"
section for voltage and amperage requirements. For proper NEMA
receptacles, refer to "Electrical service plug configuration". When using
extension cords, use the properly sized cord, and check cord voltage to
the unit.
TIME DELAY FUSES/CIRCUIT BREAKERS ARE RECOMMENDED
WARNING—OPERATING THE UNIT ON
IMPROPER VOLTAGE WILL VOID THE
WARRANTY
ACCESSORIES
Verify that all accessories are correct for the model, and that they
installed in accordance with all instructions.
START-UP
installed in accordance with all instructions.
START-UP
Install the unit in accordance with all local and state building codes, and
install all accessories. Allow for a clearance around the unit for future
maintenance and/or service. Level unit and lock casters, when
available. Connect power and test the LCDI on the power cord (if
available). Power up unit, via thermostat and check for proper
operation. Refer to Thermostat Operation for more details.
install all accessories. Allow for a clearance around the unit for future
maintenance and/or service. Level unit and lock casters, when
available. Connect power and test the LCDI on the power cord (if
available). Power up unit, via thermostat and check for proper
operation. Refer to Thermostat Operation for more details.
16