Philips BT50G/00 用户手册
5
EN
4 Play from
Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Note
•
The speaker can memorize a maximum of four paired
devices. The fifth paired device will replace the first one.
•
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
•
Make sure that no audio input cable is connected to
the AUDIO IN socket.
Connect a device
1
Slide the source selector to .
»
The LED indicator flashes blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select [Philips BT50] or [Philips BT25]
displayed on your device for pairing and
connection. If necessary, input “0000” as
the pairing password.
»
After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
• If you cannot find [Philips BT50] or
[Philips BT25] on your device, press
and hold PAIRING for more than
three seconds until you hear triple
beeps.
4
Play audio on the Bluetooth device.
Tip
•
You can use your Bluetooth device to control play.
LED indicator (blue)
Indicator
Bluetooth connection status
Fast flashing (2Hz) Pairing
Slow flashing (1Hz) Connecting
Solid blue
Slow flashing (1Hz) Connecting
Solid blue
Connected
Disconnect a device
• Press and hold PAIRING for more than
three seconds;
»
The speaker beeps for three times.
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
»
The speaker beeps twice, and the LED
indicator flashes blue.
Note
•
Before connecting another Bluetooth device, disconnect
the current device first.