AMT Datasouth 4000 用户手册

10.  Slide the green Outside Media Guide  off the Front and Back Media Rails by pulling

straight out.

11.  Thread the media over the Back Media Rail and under the Front Media Rail.

12.  Continue feeding the media through the black Upper and Lower Media Sensor Arms

located under the print module.

13.  Place the green Outside Media Guide  (smooth side in) back onto the Front and Back

Media Rails.

14.  Slide the Outside Media Guide  towards the center of the printer until it just touches but

does not buckle the media.

Back Media Rail

Front Media Rail

Outside Media Guide