AMT Datasouth 4000 用户手册

Baud rate: 2400, 4800, 9600, 19200 and 38400.

To change the Baud Rate:

FM4402:  Send the <STX>KI8

n command to the printer.  See the System

Setting Commands section for more details.

FM4602/4603: The switches on the back of the printer control Baud Rate.

See the Back Panel Switches section for more details

Data format: always 8 data bits, 1 start bit and 1 stop bit.

Parity: always no parity

Handshaking: XON/XOFF as well as CTS/RTS (hardware flow control).

Note: If you run an application with the bundled printer driver under Windows and use

the serial port, you should check the above parameters and set the flow control to
“Xon/Xoff” or “hardware”.