Roland RMP-12 用户手册
16
Getting Ready to Play
9.
Attach the RMP-12 and lock it in place.
fig.j
* You must lock them when the RMP-12 is mounted. If they
are not locked, the RMP-12 may detach from the marching
carrier during performance, possibly causing malfunction or
injury.
fig.j
10.
Adjust the marching carrier to adjust the height of
the RMP-12’s pad.
11.
Turn the angle adjustment screw (D) to adjust the
angle of the RMP-12’s pad
fig.4j
fig.4j
Using the Cable Tie
If you use the RMP-12 with an audio cable connected to its
OUTPUT jack, use the included cable tie to secure the cable.
OUTPUT jack, use the included cable tie to secure the cable.
If you use a cable tie, you’ll be able to perform without being
obstructed by the cable. The cable tie provides the additional
benefit of preventing the cable from being pulled out even if you
accidently step on it.
obstructed by the cable. The cable tie provides the additional
benefit of preventing the cable from being pulled out even if you
accidently step on it.
1.
Fasten the cable tie around the cable.
fig.4j
2.
Attach the cable tie to the J-rod.
Example 1
fig.4j
Example 2
fig.4j
D
RMP-12_e.book 16 ページ ２００８年７月１１日 金曜日 午前９時４５分