Philips MC108B 用户手册
English
xxxxx
13
Clock/Timer
AUX-IN
M C 1 0 8
M I C R O S Y S T E M
iR
Setting the timer
● The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
time. The clock time needs to be set first before
the timer can be used.
● If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
mode automatically.
1
In any mode, press
TIMER (on the remote
control) for more than 2 seconds.
2
Press
¡1 / 2™ (or CD / TUNER on the
remote control) to select sound source.
3
Press
TIMER to confirm your desired source.
➜ The clock digits for the hours flash.
4
Press
¡1 / 2™ to set the hours.
5
Press
TIMER again.
➜ The clock digits for the minutes flash.
6
Press
¡1 / 2™ to set the minutes.
7
Press
TIMER to confirm the time.
➜ The timer is now set and actiated.
Notes:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
- The volume level will be increased from min. to 20
within 2 minutes after alarm wake up.
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
- The volume level will be increased from min. to 20
within 2 minutes after alarm wake up.
Activating and deactivating
TIMER
TIMER
● In standby or during playback, press
TIMER once.
➜ Display shows if activated, and disappears
if deactivated.
➜ Display shows if activated, and disappears
if deactivated.
Setting the clock
1
In Standby mode, press
PROG/CLOCK
button.
➜ The clock digits for the hours flash.
➜ The clock digits for the hours flash.
2
Press
¡1 / 2™ to set the hours.
3
Press
PROG/CLOCK again.
➜ The clock digits for the minutes flash.
4
Press
¡1 / 2™ to set the minutes.
5
Press
PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set, --:-- will be
displayed.
– If the clock has not been set, --:-- will be
displayed.
MC108B_79_Eng
14/2/07, 11:33
13