Philips MC108B 用户手册

下载
页码 18
English
xxxxx
15
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty.  Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service centre.
Problem
Solution
CD OPERATION
no cd” is displayed.
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
Replace or clean the disc, see “Maintenance”.
Use a finalised CD-RW or CD-R.
RADIO RECEPTION
Radio reception is poor.
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Micro HiFi
System and your TV or VCR.
GENERAL
The system does not react when buttons
Remove and reconnect the AC power plug and
are pressed.
switch on the system again.
Sound cannot be heard or is of poor
Adjust the volume.
quality.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
Check the speaker connections and location.
reversed.
The remote control does not function
Select the source (CD or TUNER, for example)
properly.
before pressing the function button (
É,í,ë).
Reduce the distance between the remote control
and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
Set the clock correctly.
Press
 TIMER to switch on the timer.
If a recording is in progress, stop the recording.
The Clock/Timer setting is erased.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
MC108B_79_Eng
14/2/07, 11:33
15