Canon ELAN7NE-33V 用户手册
76
KWireless Remote Control
Using the Remote Switch
With Remote Controller RC-1 (sold separately), wireless operation is
possible up to 5 m/16.4 ft away from the front of the camera.
possible up to 5 m/16.4 ft away from the front of the camera.
1
Turn the film advance mode lever
to <p>.
to <p>.
s
The <K> icon appears on the LCD
panel.
panel.
Connect the Remote Switch RS-
60E3’s (sold separately) plug to the
camera’s remote control terminal. To
take a picture, press the Remote
Switch’s shutter-release button.
60E3’s (sold separately) plug to the
camera’s remote control terminal. To
take a picture, press the Remote
Switch’s shutter-release button.
2
Take the picture.
•
Point the signal transmitter toward
the camera’s remote control sensor
and press the signal button.
the camera’s remote control sensor
and press the signal button.
s
The remote control lamp will light,
and the picture will be taken.
and the picture will be taken.
•
For details on using the remote
control, see the RC-1’s instructions.
control, see the RC-1’s instructions.
Remote control
sensor
sensor
Certain types of fluorescent light may cause camera misoperation. During
wireless remote control, try to keep the camera away from fluorescent light.
wireless remote control, try to keep the camera away from fluorescent light.
• You can also use Remote Controller RC-5 (sold separately).
• If you set the film advance mode lever to <p> and do nothing for four
• If you set the film advance mode lever to <p> and do nothing for four
minutes, the wireless remote control mode will be canceled automatically to
save battery power.
save battery power.