Canon ELAN7NE-33V 用户手册
78
Using the Built-in Flash
In low-light or backlit conditions, the built-in flash will pop up and fire
automatically (except in <I> <P> modes).
automatically (except in <I> <P> modes).
In a Basic Zone Mode
In a Creative Zone Mode
S
: Use this mode for automatic flash photography. The flash
sync speed (within 1/60 sec. - 1/125 sec) and aperture value
will be set automatically as with the <Y> (Full Auto) mode.
will be set automatically as with the <Y> (Full Auto) mode.
R : Use this mode if you want to set the flash sync speed
manually (within 30 sec. - 1/125 sec.). The camera will set the
flash aperture value automatically to obtain a correct flash
exposure.
flash aperture value automatically to obtain a correct flash
exposure.
E : Use this mode if you want to set the flash aperture value.
The camera will set the flash sync speed (within 30 sec. -
1/125 sec.) automatically to obtain the best exposure for the
aperture you set. For portraits with a night scene or dark
background, a slow sync speed will be set to obtain a proper
exposure for both the subject and background. The flash
illuminates the subject, while the background is properly
exposed with a slow shutter speed.
• Because automatic slow-sync shooting uses a slow shutter
1/125 sec.) automatically to obtain the best exposure for the
aperture you set. For portraits with a night scene or dark
background, a slow sync speed will be set to obtain a proper
exposure for both the subject and background. The flash
illuminates the subject, while the background is properly
exposed with a slow shutter speed.
• Because automatic slow-sync shooting uses a slow shutter
speed, always use a tripod.
W
: Enables you to manually set the shutter speed (30 sec. -
1/125 sec. or bulb) and aperture. The subject is properly
exposed with the flash and the background is exposed with the
flash sync speed and aperture value you have set.
exposed with the flash and the background is exposed with the
flash sync speed and aperture value you have set.
Q : This mode gives the same flash result as the <S> mode.
Just pop-up the built-in flash to fire the flash regardless of the ambient
light level.
light level.