Baby Trend E30FL0211U 用户手册

1. Park your vehicle on a level surface so that 

the level indicator located on the left side 

of the Safety Seat will properly indicate the 

proper angle of recline of the seat.

2. Make sure you have selected an acceptable 

location for the safety seat as instructed in 

section 

the Safety Seat on page 12.

3. Check again for any Active Air bags.  

NOT use any location that has an active 

air bag or is adjacent to an Active Air bag 

such that, when deployed, the Active Air bag 

may come into contact with the Safety Seat.  

Many passenger side Active Air bags are 

designed to deploy to protect the  

passenger side as well as the center front 

seating position.  Please see the Active 

Air bag warnings in your vehicle owner’s 

manual to help determine unsafe locations  

in the vehicle.

4. If the front seat position is used, slide the vehicle seat as far 

to the rear as possible to prevent the safety seat from striking 

the dash in a crash.  If the rear seat position is used, slide the 

vehicle seat directly in front of the Safety Seat forward enough 

to prevent the Safety Seat from striking the vehicle seat back in 

a crash.

5. Check that the vehicle seat back is locked in the upright 

position and will not fold forward onto the Safety Seat.   

(Fig. 39-1)

1. Remove the Safety Seat from the base 

by squeezing the base release handle 

located under the center of the foot end of 

the Safety Seat and lifting upward on the 

Safety Seat (See Fig. 25-1). 

2. If you are using the Base with the Safety 

Seat, place the Base in the rear-facing 

position in a forward facing vehicle seat 

as shown in Fig. 39-2.  If you are using 

the Safety Seat without the Base, place 

the Safety Seat in a rear-facing position 

in a forward facing vehicle seat as 

shown in Fig. 40-1.  

The Child must face 

the rear of the vehicle and Safety Seat 

must be placed in a vehicle seat that 

faces forward.

3. See Fig. 39-2 for the proper threading of 

the vehicle belt through the Base and Fig. 

40-1 for the proper threading of the belt 

Fig. 39-1

Folding seat must  

be locked

Fig. 39-2

Lap/Shoulder Belt

Lap Belt only