3D Innovations NC60 用户手册
Control Panel Messages
5-2
❖
DocuPrint NC60 System Administrator Guide
Control Panel Messages
Listed in Table 5.1 are Control Panel messages that either:
• Cause the printer to stop printing.
• Require the user to call for service.
Also included in Table 5.1 are common, non-error
messages you are likely to see. The messages are listed in
alphabetical order.
messages you are likely to see. The messages are listed in
alphabetical order.
Table 5.1
Control Panel Messages and Corrective Actions
Message
Explanation/Required Action
C1-CHECK TRAY 1
Tray 1 is misinstalled or not installed in the printer.
C2-CHECK TRAY 2
Tray 2 is misinstalled or not installed in the printer.
E1-TRAY 1 JAM
OPEN PRINTER
Tray 1 misfeed. Check tray and open printer to clear.
E2-TRAY 2 JAM
OPEN PRINTER
Tray 2 misfeed. Check tray and open printer to clear.
E3-BYPASS JAM
OPEN PRINTER
Manual bypass misfeed. Open printer to clear.
E4-INPUT JAM
OPEN PRINTER
Paper jam in the input roller area. Open printer to clear.
E5-FUSER JAM
OPEN PRINTER
Paper jam in the fuser area. Open printer, open the Fuser cover, release the
Fuser lever to clear.
Fuser lever to clear.
E6-DRUM JAM
OPEN PRINTER
Paper jam in the transfer drum area. Open the printer to clear.
E7-PRINT DRUM
JAM-OPEN PRINTER
Paper jam in the print drum area. Open printer to clear.