Dacor EF36BNFSS 用户手册

Page 3

Top Right Handle Installation
STEP 7:   Mount the handle to the right door by slid-

ing the holes on the back over the handle 

mounting studs on the right door. Make sure 

the set screw holes face toward the center 

of the refrigerator. Loosen the set screws if 

necessary to allow the handle to slide into 

place.

STEP 8:   Carefully tighten the set screws into place 

using the 3/32” Allen wrench. Be careful not 

to scratch the finish.

STEP 9:   Check to make sure the handle is firmly at-

tached.

Top Left Handle Installation
STEP 10:   Mount the remaining handle to the left door 

with set screw holes toward the center of the 

refrigerator. Loosen the set screws if neces-

sary to allow the handle to slide into place.

STEP 11:   Open the left door while holding the handle 

in place to prevent damage to the other 

handle during step 12.

STEP 12:   Carefully tighten the set screws into place 

using the 3/32” Allen wrench. Be careful not 

to scratch the finish.

STEP 13:   Check to make sure the handle is firmly  

attached.

Handle Mounting 

Studs 

Set Screw 

Holes

Handle Mounting 

Stud

Handle Mounting 

Stud

Set Screw 

Hole

Set Screw 

Hole