Grizzly H8172 用户手册

H8172 Cement Mixer

-9-

Assembly

To assemble the cement mixer:

1. Insert the wheels on the axles and secure

them in place with the hairpin cotter pins, as
shown in

Figure 3.

��
��

��

Figure 3. Wheels installed on axles.

2. Attach the support leg to the frame with two

M8-1.25 x 65 hex bolts on one side and two
8mm flat washers, lock washers, and hex
nuts on the other side (

Figure 4).

��

Figure 4. Support leg installation.

3. Connect the upper and lower plunger rods

together with an M6-1 x 25 hex bolt and M6-
1 lock nut, then insert the cotter pin where
shown in

Figure 5. Bend each leg of the cot-

ter pin outward so it can't fall out.

��

Figure 5. Plunger rod installation.

4. Attach the axle bracket to the frame with two

M8-1.25 x 65 hex bolts on one side and two
8mm flat washers, lock washers, and hex
nuts on the other side (

Figure 6).

��

Figure 6. Attaching axle bracket to frame.