Grizzly G0495X 用户手册

-14-

g0495X 8" Jointer w/digital readout

the  model  g0495X  requires  the  use  of  lifting
equipment  such  as  a  forklift,  engine  hoist,  or
boom  crane.  do  not  try  to  lift  the  machine  by
hand.

To lift the jointer:

1. unbolt the jointer from the pallet.

2. Wrap lifting straps around the lifting rods, as

shown in

figure 9.

Moving & placing

Jointer

The Model G0495X is a

heavy machine. Serious

personal injury may occur

if safe moving methods

are not used. To be safe,

get assistance and use

power equipment to move

the shipping crate and

remove the machine from

the crate.

figure 9. model g0495X supported evenly by

two lifting straps.

Although  not  required,  we  recommend  that  you
mount your new machine to the floor for increased
stability  and  vibration  dampening.  Because  this
is an optional step and floor materials may vary,
floor  mounting  hardware  is  not  included.  if    you
bolt  your  machine  to  the  floor,  it  is  necessary  to
level your machine with a precision level.

bolting to concrete floors

lag shield anchors with lag bolts (

figure 10) and

anchor studs are two popular methods for anchor-
ing an object to a concrete floor. We suggest
you research the many options and methods for
mounting your machine and choose the best that
fits your specific application.

Mounting to Shop

floor

NOTICE

Anchor studs are stronger and more per-

manent alternatives to lag shield anchors;

however, they will stick out of the floor,

which may cause a tripping hazard if you

decide to move your machine.

figure 10. typical fasteners for mounting to

concrete floors.

Anchor stud

lag shield Anchor & lag Bolt

3. With lifting straps positioned evenly, lift the

jointer off of the pallet and place it in the
desired location.

lifting rods