Husqvarna 325P5X 用户手册

English

 – 13

increase oil consumption, check the level in the oil tank 
regularly. Turn the adjuster screw clockwise to decrease the 
oil flow.

•

Check that the oil channel in the bar is not obstructed. 
Clean if necessary.

•

Check that the oil channel in the gear housing is clean. 
Clean if necessary.

•

Check that the bar tip sprocket turns freely. If the chain 
lubrication system is still not working after carrying out the 
above checks you should contact your service workshop.

Check the chain daily for:

•

Visible cracks in rivets and links.

•

Whether the chain is stiff.

•

Whether rivets and links are badly worn.

We recommend you compare the existing chain with a new 
chain to decide how badly the existing chain is worn.

When the length of the cutting teeth has worn down to only 4 
mm the chain must be replaced.

Regularly check the degree of wear on the drive sprocket. 
Replace if wear is excessive.

Check regularly:

•

Whether there are burrs on the edges of the bar. Remove 
these with a file if necessary.

•

Whether the groove in the bar has become badly worn. 
Replace the bar if necessary.

•

Whether the tip of the bar is uneven or badly worn. If a 
hollow forms on the underside of the bar tip this is due to 
running with a slack chain.

•

To prolong the life of the bar you should turn it over daily.