Wasp Bar Code WLS 8400 FZ 用户手册

8-34

To enable or disable Code 11, scan the appropriate bar code below.

The length of a code refers to the number of characters (i.e., human readable characters), 
including check digit(s) the code contains. Lengths for Code 11 may be set for any length, 
one or two discrete lengths, or lengths within a specific range. 

One Discrete Length - This option allows the scanner to decode only those Code 11 
symbols containing a selected length. Lengths are selected from the numeric bar codes 
beginning on page 

. For example, to decode only 

Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1 
followed by 4. In case of an error, or to change the selection, scan Cancel on page 

.