Wasp Bar Code WLS 8400 FZ 用户手册

8-35

Two Discrete Lengths - This option allows the scanner to decode only those Code 11 
symbols containing either of two selected lengths. Lengths are selected from the numeric 
bar codes beginning on page 

. For example, to 

decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 - 
Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change 
the selection, scan Cancel on page 

.

Length Within Range - This option allows the scanner to decode a Code 11 symbol 
with a specific length range. The length range is selected from numeric bar codes 
beginning on page 

Chapter D, Numeric Bar Codes. 

For example, to decode Code 

11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within 
Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading 
zero). In case of an error, or to change the selection, scan Cancel on page 

Any Length - This option allows the scanner to decode Code 11 symbols containing any 
number of characters within the scanner capability.