Wasp Bar Code WLS 8400 FZ 用户手册
Symbologies
8-45
Set Lengths for Discrete 2 of 5 (continued)
Two Discrete Lengths - This option allows the scanner to decode only those D 2 of 5
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
. For example, to
decode only those D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change
the selection, scan Cancel on page
Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change
the selection, scan Cancel on page
.
D 2 of 5 - Two Discrete Lengths
Length Within Range - This option allows the scanner to decode an D 2 of 5 symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page
with a specific length range. The length range is selected from numeric bar codes
beginning on page
For example, to decode D 2
of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 - Length Within
Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading
zero). In case of an error, or to change the selection, scan Cancel on page
Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading
zero). In case of an error, or to change the selection, scan Cancel on page
D 2 of 5 - Length Within Range