Wasp Bar Code WLS 8400 FZ 用户手册

下载
页码 394
Symbologies
8-47
Set Lengths for Codabar
The length of a code refers to the number of characters (i.e., human readable characters), 
including check digit(s) the code contains. Lengths for Codabar may be set for any length, 
one or two discrete lengths, or lengths within a specific range. 
One Discrete Length - This option allows the scanner to decode only those Codabar 
symbols containing a selected length. Lengths are selected from the numeric bar codes 
beginning on page 
 in 
. For example, to decode only 
Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 
followed by 4. In case of an error, or to change the selection, scan Cancel on page 
Codabar - One Discrete Length
Two Discrete Lengths - This option allows the scanner to decode only those Codabar 
symbols containing either of two selected lengths. Lengths are selected from the numeric 
bar codes beginning on page 
For example, to 
decode only those Codabar symbols containing either 2 or 14 characters, select Codabar - 
Two Discrete Lengths
, then scan 02, 1, and then 4. In case of an error, or to change 
the selection, scan Cancel on page 
.
Codabar - Two Discrete Lengths