Wasp Bar Code WLS 8400 FZ 用户手册
RS-232 Interface
6-3
Introduction
This chapter provides RS-232 host information for setting up the scanner. The RS-232
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (i.e., com port).
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (i.e., com port).
If the particular host is not listed in
, set the communication parameters to match
the host device. To set communication parameters for hosts not listed, refer to the
documentation for the host device.
documentation for the host device.
This scanner utilizes TTL RS-232 signal levels, which interfaces with
most system architectures. Please contact Wasp Support for more
information.
most system architectures. Please contact Wasp Support for more
information.
Throughout the programming bar code menus, default values are indicated with asterisks
(
(
*
).
*
Baud Rate 9600
Feature/Option
*
Indicates Default