Wasp Bar Code WLS 8400 FZ 用户手册

6-4

This connection is made directly from the scanner to the host computer.

Interface cables vary depending on configuration. The connectors 
illustrated in 

 are examples only. The connectors may be 

different than those illustrated, but the steps to connect the scanner 
remain the same.

1. Attach the modular connector of the RS-232 interface cable to the cable interface 

port on the scanner. (See Installing the Interface Cable on page 1-5.)

2. Connect the other end of the RS-232 interface cable to the serial port on the host. 

3. Connect the power supply to the serial connector end of the RS-232 interface cable. 

Plug the power supply to an appropriate outlet. 

4. Ensure that all connections are secure.

5. Select the RS-232 host type by scanning the appropriate bar code from the 

 section on 

6. To modify any other parameter options, scan the appropriate bar codes in this 

chapter. 

Serial Port Connector to 

Interface 

Power supply