Rose electronic 2xE 用户手册
ULTRAMATRIX E-SERIES MANUAL
44
Save menu
UltraMatrix version MX21C Rose Electronics Copyright 1990-2002
Main Menu
Configure
System
Computer
KVM
User
Profile
Group
Language
Status
System
Computer
KVM
User
Profile
Group
Language
Status
Save
Exit
Use up/down arrow keys
to choose selection
then press the Enter key
or the Escape key to exit
to choose selection
then press the Enter key
or the Escape key to exit
Configure password,box number,keyboards settings,appearance
Figure 15. Save menu
When changes are made to any configuration, they must be saved in
flash memory to insure that the changes will be active after a power
cycle. It is recommended that all users be logged off from all systems
prior to saving any configuration changes. To save the settings, select
save and press [Enter]. The UltraMatrix will check and display how
many CPU cards in the system to update. This is the total number of
CPU cards (RS232 ports) in the system not counting the one the KVM
station is connected to. (Total boards – 1)
A YES/NO selection box will display. Choose “YES” to save the
changes to flash memory on all powered-on UltraMatrix switches.
Choose “NO” for temporary or incorrect changes. The temporary
settings will only be in effect as long as power is applied to the Unit.
Once power is cycled, unsaved changes, other than the starting
computer number, are lost and the previously saved configuration
settings will be effective.
flash memory to insure that the changes will be active after a power
cycle. It is recommended that all users be logged off from all systems
prior to saving any configuration changes. To save the settings, select
save and press [Enter]. The UltraMatrix will check and display how
many CPU cards in the system to update. This is the total number of
CPU cards (RS232 ports) in the system not counting the one the KVM
station is connected to. (Total boards – 1)
A YES/NO selection box will display. Choose “YES” to save the
changes to flash memory on all powered-on UltraMatrix switches.
Choose “NO” for temporary or incorrect changes. The temporary
settings will only be in effect as long as power is applied to the Unit.
Once power is cycled, unsaved changes, other than the starting
computer number, are lost and the previously saved configuration
settings will be effective.
Boards to update = 3
Save configuration?
YES
NO