Rose electronic 2xE 用户手册

 

Keyboard commands (continued) 

Send Null Byte   [Ctrl] N 

Sends a null byte to the CPU’s 
PS/2 mouse port.  Use this 
command if the PS/2 mouse 
gets “out of sync”. 

Reset Mouse 
(NT or Unix 
systems only) 

[Ctrl] O (not zero) 

Resets the currently selected 
NT or Unix computers PS/2 
mouse.  Also switches the NT 
mouse driver to “wheel” mode. 

Start Scan 

[Ctrl] S 

Sequentially steps through all 
connected CPUs in a group. 

Stop Scan 

[Ctrl] X 

Turns scan “Off” 

Table 1. Keyboard commands 

When you first start using a KVM station, it may require you to login.  If 
the KVM station requires a login, the login box, shown in Figure 16, will 
display. The login box appears when a Unit is powered on, when a user 
logs off, or when a preset time interval passes with no keyboard or 
mouse activity. If a login is required, type in your User ID and press 
[Enter]. (User ID is the user name defined on the configure user menu) 
If the user ID is validated, you can then type in your password and 
press [Enter].  If the password is validated, the KVM station can be 
accessed. A user may login with the same user ID and password at 
more than one KVM station. Both the User ID and password are case 
sensitive. 
 
 
 
 
 
 
 

Figure 16. Login screen 

Once you have access to a KVM station, you can switch to any of the 
connected computers provided your security profile allows access to 
that computer.  To connect to a computer, you can use the “Direct CPU 
Connect” keyboard command or the “Computer select” menu.   
(See Table 1)