Intel ESM-2743 用户手册

下载
页码 93
ESM-2740/2743 
 
64 ESM-2740/2743 User’s Manual
 
 
3.5.5.6 Suspend 
Type 
Select the suspend type. 
The choice: Stop Grant, PwrOn Suspend. 
3.5.5.7 
MODEM Use IRQ 
This determines the IRQ in which the MODEM can use. 
The choice: 3, 4, 5, 7, 9, 10, 11, or NA. 
3.5.5.8 Suspend 
Mode 
Select the suspend type. 
The choice: Disable, 1, 2, 4, 8, 12, 20, 30, 40 Min, 1 Hour. 
3.5.5.9 
HDD Power Down 
After the selected period of drive inactivity, any system IDE devices compatible with the 
ATA-2 specified timeout and then waking themselves up when accessed.. 
The choice: Disable, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Min. 
3.5.5.10  Soft-Off by PWR-BTTN 
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off 
state when the system has “hung”.(Only could working on ATX Power supply) 
The choice: Delay 4 Sec, Instant-Off. 
3.5.5.11  Wake-Up by LAN/PCI card 
This will enable the system to wake up through LAN/PCI Card peripheral. 
The choice: Enable, Disabled. 
3.5.5.12  Power On by Ring 
This determines whether the system boot up if there’s an incoming call from the Modem. 
The choice: Enable, Disabled. 
3.5.5.13  Resume by Alarm 
This function is for setting date and time for your computer to boot up. 
 
Reload Global Timer Events 
 
3.5.5.14  Primary IDE 0/1,Secondary IDE 0/1,FDD,COM,LPT PORT,PCI PIRQ[A-D]# 
Reload Global Timer events are I/O events whose occurrence can prevent the system from 
entering a power saving mode or can awake the system from such a mode. In effect ,the 
system remain alert for anything which occurs to a device which is configured as 
Enabled ,even when the system is in a power down mode.
 
The choice: Enable, Disabled.