Xerox 8855 用户手册

XES Synergix 8825/8830/8850/8855 Digital Solution User Guide

59

The Synergix Digital Solution has two scanning modes of operation: COPY
mode and SCAN mode.

NOTE:  The SCAN mode is optional on the Synergix 8825 Digital Solution.  It
is a standard feature on the Synergix 8830 Digital Solution and Synergix 8855
Digital Solution..  For ordering information, contact your XES representative.

•  In COPY mode, documents are scanned, temporarily stored in memory

or on the internal hard disk, and then sent to the local Printer as soon as
the Printer is available.  When the next job is scanned, the file from the
previous job is automatically deleted from the hard disk, making room for
new files.  Operation of the system works as described in the previous
sections.

•  In SCAN mode, the image file created by scanning is stored directly on

the hard disk for later retrieval over a connected network by a remote
system.  The image is stored in Tagged Image File Format (TIFF) 6.0
using CCITT Group 4, CALS compression, or PDF.

Files stored in SCAN mode can be retrieved over the network.  After the
file is retrieved by the AccXES Client Tools program running on a
network-connected computer, the image residing on the local hard disk is
deleted automatically.  For more information, refer to the AccXES Client
Tools User Guide.

Other remote retrieval programs can use the File Transfer Protocol (FTP)
to retrieve and delete files from the Synergix Digital Solution hard disk
over the network.  These other programs will copy the files rather than
move them, so the files remain on the local hard disk after retrieval.

After a file has been on the local hard disk for longer than the time specified
for the FILE DELETION Timer, the system automatically deletes the file.
Refer to the Main Menu, Configuration menu, Timers section for information
about setting the FILE DELETION timer.